Publicité
Les langues disponibles
Les langues disponibles
OPERATION
CHARING THE BATTERY PACK
1. Pull the lock button on the battery to pull the battery pack out of the equipment.
2. Insert the charger's plug into the electrical wall
outlet.
3. Place the battery pack into the charger by sliding the
pack as shown to lock it into position.
4. When charging is complete, remove the battery from
the charger by pulling the push lock button.
NOTE: Optimal charging temperatures are between 32°F and 104°F (0°C - 40°C).
wrong with the battery. Contact
The Charger LED Light illuminates in a specified order to show the current battery status. They are as
follows:
CHARGING PROCEDURE (LED INDICATOR)
BATTERY IS CHARGING
FULLY CHARGED
BATTERY IS TOO WARM (REMOVE
FOR APPROX. 30 MINUTES TO ALLOW TO
COOL)
STANDBY STATE
DEFECTIVE BATTERY OR CHARGER
(REMOVE AND REPLACE WITH A NEW
BATTERY OR CHARGER)
Battery Charge Level Indicator
The battery pack are equipped with a push button for checking the charge level. Simply press the push
button to read off the battery charge level from the LEDs of the battery indicator:
Lights
1 Light On
2 Lights On
3 Lights On
4 Lights On
NOTE: If the charge level button does not appear to be working, place the battery pack on the charger and
charge as needed.
customer service center at for assistance
Light Indicators
The battery is at 25% capacity and requires charging.
The battery is at 50% capacity and requires charging soon.
The battery is at 75% capacity.
The battery is at full capacity.
9
If there is something
GREEN BLINKING
GREEN
RED AND GREEN BLINKING
ALTERNATELY
RED
RED BLINKING
Publicité
