Any damage related to any of the following points can not be taken into consideration and
covered by our guarantee :
- Defects of supervision, maintenance and maintenance
- Maintenance due to normal wear and tear
- Maintenance of the product not in accordance with the instructions of the manual
- Any adaptation of the product that would be necessary for compliance with the technical or
safety standards applicable in a country other than that for which the product was originally
designed and manufactured
- Use or installation that does not conform to the use for which the product is intended or to
the technical or safety standards in force in the country where it is used
- Non-observance of instructions, safety precautions and instructions stipulated in the manual
- A case of force majeure, sinister (fire, flood, etc.), lightning, etc.
- A modification or repair of the product not carried out by a qualified professional
- Use of parts and accessories not compatible with the product or defective
- Immediate or delayed damages resulting from improper handling during transport,
mishandling, falling, shock, contact with water, sand or any other substance, etc.
- Improper treatment of the product due to inappropriate environment (poor aeration,
exposure to moisture or strong heat, vibration, non-adapted power supply, surge, etc.)
Whether with respect to the purchaser, installer or any other person, our company
cannot under any circumstances be held liable for any physical or material damage of
any kind whatsoever, which may be caused by our products or which would be the
direct or indirect consequence of the use of our products.
3. DESCRIPTION
1. Front grille
2. Grilles locking ring
3. Blade locking nut
4. Blade
5. Rear grille locking nut
6. Rear grille
7. Motor block
8. Oscillation knob
9. Control panel + screw
10. Power cord
11. Extensible tube part
12. Tube locking screw
13. Tube
14. Base
15. Tube and base assembly bolt
4. ASSEMBLY
WARNING : Before assembling your appliance, carefully read the safety instructions
in this manual.
Insert the tube (13) into the hole in the center of the base (14) and tighten the bolt (15).
Tighten the bolt carefully to avoid damaging the appliance.
Adjust the tube (11) to the desired height and secure it with the screw (12) by tightening it
clockwise.
14