TECE SH-DTP Guide D'utilisation page 56

5.5 Selection of configuration menu
User accesses to selection of configuration menu by pressing
Main screen
20
Tu
13:30
There are two different configuration menus, three if reversible menu is allowed (see paragraph "Reversible menu"):
LCD displaying
ProG Mo Tu We Th Fr Sa Su
PArA
rEuE
56
Long press
8
(3 seconds)
C
°
.
Menu selection name
Program selection
31
program edition
User parameter selection
Reversible menu
during 3 seconds:
Configuration selection
PArA
ProG Mo Tu We Th Fr Sa Su
31
rEuE
(User must allow it)
Configuration
setting
User will choose a program to apply in Auto mode
AUTO
User will edit user program or select built-in
&
programs or edit built-in programs (see paragraphs
"Program selection menu" and "Program edition
menu").
Important point: This configuration isn't available
when thermostat is paired with a central unit.
User will go to menu to select thermostat parameter
to set (see paragraph "User parameter selection
menu".)
User will go to this menu to change system
configuration: heating, cooling, or automatic H&C
switching (see chapter "Reversible menu page 22").
User will have to activate this menu with a specific
parameter (see paragraph "User parameter
description"). Reversible menu is described in
paragraph "reversible menu".
Description
GB