Sony VAIO VGP-MR100 Série Guide De Démarrage Rapide page 19

When the computer is connected to the Internet not via dial-up
modem or is not connected to the Internet
System environment
E
Using an internal modem to connect to the Internet
F
Not connected to the Internet
G
Connecting to multiple computers in the E or F
environment
v
A router with built-in hub (or a stand-alone
hub) is required.
z
Hints
• To check whether your ADSL/cable modem has router capability, consult the instructions that came
with the modem, or contact your ADSL or cable internet provider.
• The default setting of the Network Media Receiver is "Obtain an IP address automatically (using
router)". Depending on your system environment, this setting may have to be changed. For information
on how to do this, see page 28.
How to connect
See "Case 3: Network connector of computer
is free" (page 22).
Note
After connection, set the IP address of the
computer to a fixed value, as described in
"Assigning a fixed IP address to the
Network Media
computer" (page 22).
Receiver
See "Case 3: Network connector of computer
is free" (page 22).
Note
After connection, set the IP address of the
computer to a fixed value, as described in
"Assigning a fixed IP address to the
Network Media
computer" (page 22).
Receiver
See "Case 1: Connecting via a router with
built-in hub" (page 20, G).
Note
When using a stand-alone hub, set the IP
address of the computer to a fixed value, as
described in "Assigning a fixed IP address to
the computer" (page 22).
Network Media
Receiver
VGP-MR100QSG(GB)_2-580-488-11(1)
19