Gregster ERGO TZ4613 Mode D'emploi page 23

STEP 4
Attach the pre-installed handlebar (23)
to the handlebar mount using hexagon
socket screws M8 (4), spring washers (5),
washers (6) and upper clamp (8). To do
so, use the hex key (98). Install the handle
bar cover (7) on the connector.
STEP 5
Attach the bottler holder (89) to the
frame using the screws M5 (13). Use the
multifunctional tool (96) to do so. Insert the
bottle (90) into the holder (89).
44
GRG-SRP-3000-IM-DE+GB+FR-V1.indb 44-45
7
4
4
5
6
8
23
98
5
13
89
90
96
STEP 6
Attach the pulse wire (34) and the lower
cable (16) to the computer (1).
Then attach the computer mount (2) to
the handlebar rod (14) and secure the
connection with the screws M5 (13).
Use the multifunctional tool (96) to do
so. The device is then fully assembled.
Connect the power adapter (81) to the
connection socket (80). Connect the power
plug to a suitable wall socket to start
exercising.
34
6
16
1
13
81
96
80
45
27/6/2016 3:01 PM