Safety; Personal Protective Equipment - Reflex 300 Manuel D'installation Et D'entretien

1

Safety

Installation, Alteration
The heater must only be installed or altered by an approved specialist company.
The heater must only be used for heating potable water.
Operation
These operating and maintenance instructions must be observed for flawless operation.
CAUTION
Do not close the safety valve!
Water seeps from the safety valve during the heat-up phase.
Thermal Disinfection
CAUTION
Risk of scalding!
Brief operation at temperatures > 60 °C must always be monitored.
Maintenance
We recommend taking out a maintenance agreement with an approved specialist
company. The heater should be serviced at least every two years; preferably every year.
1.1

Personal protective equipment

When working at the system, wear the stipulated personal equipment such as hearing and eye protection, safety boots, helmet, protective clothing,
protective gloves.
See the national regulation of your country for personal protective equipment required.
Indirectly fired hot water heater — 06.2017
Safety
English — 3