Setting The Date - DS Produkte OTUMM Mode D'emploi

Setting the Date

Please remember the 24-hour mode when you set
a new date and time, e.g. after a change of bat-
tery!
1. Set the date of the previous day.
2. Set the time (see the "Setting the Time" section).
First turn the crown until the current date appears.
3. Then keep turning the crown to the current time.
1. Pull the crown out to position
II.
2. Turn the crown clockwise until
the current date is displayed.
3. Push the crown back to posi-
tion I.
24