Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IP Value
What's an IP value?
The IP value indicates to what extent electrical appliances such as lighting fixtures are shielded against
solid objects and water. An IP value always consists of two digits.
The first digit indicates protection against solid objects. The second number indicates the degree to
which the appliance is protected against water.
It makes sense that when a device is well sealed against water, it is also difficult for solid objects to
enter the device. A high second digit is therefore always accompanied by a high first digit.
IP Value
Digit 1
IP 0x
Not protected.
IP 1x
Protected against solid objects with a diameter greater than 50mm (eg accidental
contact with hands).
IP 2x
Protected against solid objects with a diameter greater than 12mm (eg fingers).
IP 3x
Protected against solid objects with a diameter greater than 2.5mm (eg wires, cables
and tools).
IP 4x
Protected against solid objects with a diameter greater than 1mm (eg wires, cables
and tools).
IP 5x
Complete protection against contact with live parts (i.e. wiring) and at the same time
harmful accumulation of dust. Dust can enter, but this will not affect operation.
IP 6x
Complete protection against contact with live parts (i.e. wiring) and against ingress of
dust.
IP Value
Digit 2
IP x0
Not protected.
IP x1
Protected against vertically falling water drops.
IP x2
Protected against water drops falling at a maximum angle of 15 °.
IP x3
Protected against water falling at an angle of up to 60 °.
IP x4
Protected against splash water from any direction.
IP x5
Protected against low pressure water jets from any direction.
IP x6
Protected against strong water jets from any direction.
IP x7
Protected against temporary immersion in water (15cm to 1m deep). Test duration:
30 min.
IP x8
Protected against prolonged immersion in water, under pressure.
9
Publicité
Table des Matières
