Robby STEAM UP Manuel D'utilisation page 20

MAINTENANCE TIPS:
IT IS PREFERABLE TO USE DISTILLED OR DEMINERALIZED WATER FOR YOUR APPLIANCE
TO REDUCE ENLARGING
- Please unplug the appliance before cleaning.
- Do not use additives or corrosive liquids (eg alcohol, gas or acetone).
- Use a damp soft cloth to remove limescale from the diffusion head.
- We advise you to clean your steamer every 15 days.
TROUBLESHOOTING GUIDE:
PROBLEME
Not working
Intense pipe noise and / or low
steam flow
Drops of water on the diffusion
head
The water leaks from the tank
Water drains from the point of
assembly between the hull and
the pipe
Do not heat
No steam
CAUSE
- Damaged electric wire
- Defective light indicator
-A fuse is broken
-The diet is insufficient
- There is condensation
in the pipe
- The handle is in position horizontal or
the head of broadcast is damaged
- The container is damaged
- The hose is loose
- The fixing ring is damaged
-There is no power
-The switch is in the OFF position
-The power cord is connected
-A component does not work anymore
-There is no water in the tank
-There is limestone in the tank
sav@robby.fr
SOLUTION
- Contact: SAV@ROBBY.FR
- Connect the device to another socket
- Straighten the hose to the up to allow
water to go back down in the device
- Straighten your head towards the top
- Swap the head damaged
- Contact: SAV@ROBBY.FR
- Change the ring
- Tighten the assembly point
-Connect the device
-Turn the switch to ON
-Make sure the power cord is connected
-Replace component
-Contact the customer service
-Turn off the appliance and put water in
the tank
-Clean the appliance
p.20