Publicité
Les langues disponibles
Les langues disponibles
BATTERY VOLTAGE
Interface one-way circulation is performed by pressing
there's no failure, display presents the current interface until press
any key; if there 's failure, after 20s absence of key operation the
error code interface is presented.
In interface "Battery voltage", or "Error code" by short pressing
load is switched on or off. In interface "Ah-Battery Charge
5.3 - Battery communication
BATTERY VOLTAGE
In main loop "Battery voltage" interface, by long pressing (>3S)
you can access secondary one-way loop.
In secondary loop, by short pressing
interfaces, and by short pressing
while a long-pressing (>3S)
a 20s absence of operation bring you to main loop interface with
data unsaved.
Battery type: Four battery types are preset which are GEL, SLD,
FLD and USr. Only parameters of USr type are adjustable.
5.4 - Controller SN
TEMPERATURE
INTERNAL TEMPERATURE
In main loop "Temperature" interface, by long pressing (>3S)
you can access secondary one-way loop. In secondary loop, by
short pressing
you can circulate interfaces and a long-pressing
(>3S) or a 20s absence of operation, you can exit.
TEMPERATURE
ERROR CODE
BATTERY TYPE
you can circulate
you can change values,
enables data saving and exit, and
SOLAR PANEL
INPUT CURRENT
AH-BATTERY DISCHARGE
METER
Meter" or "Ah-Battery Discharge Meter" by long pressing (>3S)
SIf
, data is cleared.
In "Battery voltage" interface, by long pressing
simultaneously until the screen is fully bright controller is restored
to factory defaults.
BATTERY TYPE
RECOGNITION
ATTENTION !
Set the appropriate battery type (GEL, SLD, FLD or USr)
Battery voltage level identification: automatic identification (AUO),
fixed 12V, fixed 24V, fixed 36V and fixed 48V.
Controller restarts automatically to update data after battery type
and voltage grade are set.
SOFTWARE VERSION
VOLTAGE
Controller communication SN: composed of 8 digits, every 2 digits
displayed sequentially,eg:--88 56 73 24
OUTPUT CURRENT
AH-BATTERY CHARGE
METER
and
COMMUNICATION CODE
CONTROLLER SN
EN
11
Publicité
