Audio Service KSAA0500080W1UV-1 Mode D'emploi page 7

12
Close the lid of the charger.
The hearing instruments are switched off automatically and the
charging starts.
The status LEDs are blinking.
Charging is complete and the drying cycle has started when the
status LEDs stay on continuously.
Drying is complete when the status LEDs are off.
Remove the hearing instruments from the charger when you
next want to use them. The hearing systems are normally
switched on.
Check if the hearing instruments are turned on. Should the hear-
ing systems not be switched on, please consult your hearing
system specialist.
HOW TO CHARGE HOW TO CHARGE
CHARGER'S STATUS
LED and state Explanation
Power LED is off The charger is not connected to the power supply.
Check whether the charger is connected to
the correct power supply.
Power LED No hearing instrument in the charger: the
shining green charger is connected to power supply. The
charger is ready to use.
Hearing instruments in the charger: Drying
process is finished.
Remove hearing instruments from the char-
ger when you want to use them.
Status LEDs Charging of left/right hearing instrument is on-
blinking green going.
Leave hearing instrument in the charger.
Status LEDs Charging of left/right hearing instrument is fin-
shining green ished. The drying is ongoing.
Leave hearing instrument in the charger.
13