Installer Options - Weinmann & Schanz E200 Manuel D'utilisation Et D'installation

3. Installer options

Attention: The settings should only be carried out by the installer only, as settings may affect the
functions and security of the heating system. List of Installer options see Table 2.
To activate the menu,
Select an option
Change an option
Press < or > to accept each change.
To exit the menu, press the < and + buttons simultaneously for 5 seconds.
If no button is pressed within 2 minutes, the controller will return to the auto mode.
3.1 Kind of program (option 1, table 2 on page 53)
The operating mode of the controller is set via this function.
7 days (7d):
Different time/temperature settings can be chosen for each day individually.
5/2 days (5:2):
Different time/temperature settings can be chosen for the weekdays (Monday to Friday) and the
weekend (Saturday and Sunday) in this mode.
24 hours (24h):
The same time/temperature settings are used for all days of the week in this mode.
in AUTO mode, press the < and + buttons simultaneously for 5 sec-
InSk00
onds, will be displayed
by pressing the < or > button
by pressing the + / – button
49