Automatic Mode (Auto); How To Change The Temperature For A Short Period Of Time (Override); How To Set A Constant Room Temperature (Manual Operation, Man) - Weinmann & Schanz E200 Manuel D'utilisation Et D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Automatic mode (Auto)

In this mode, the room temperature is automatically controlled according
to the pre-set program. The pointer indicating the mode is set to AUTO.
The number at the bottom right indicates the program event during the
day.

4. How to change the temperature for a short period of time (override)

When in AUTO mode, you can override the existing temperature setting for
a short period of time. Press the + or – buttons to change the temperature
setting. While in temperature override the pointer indicates both AUTO
and MAN. When the next programmed time/temperature event is reached,
the device will revert to the AUTO mode.

5. How to set a constant room temperature (manual operation, Man)

In this mode, a constant temperature can be set, and the pre-set program is
ignored. The temperature last selected is chosen as the initial temperature.
How to activate this mode
Press the < button until the pointer indicates MAN.
Set the temperature
Exit the mode
by pressing the > button
by pressing the + / – button
1
2
3
4
5
6
7
Man Auto Day
1
2
3
4
5
6
7
Man Auto Day
1
2
3
4
5
6
7
Man Auto Day
35

Publicité

Table des Matières
loading

Table des Matières