Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OFF 7
DOMENICA
PROG - 1
Confirm by pressing P5 to go to the next screen.
At this point, select power for PROG - 1.
P - 4
POTENZA
PROG - 1
After selecting the power it is possible to choose room temperature to be reached in that room, independently from the temperature set for
room temperature during manual operation. As soon at room temperature reaches the set value, the stove goes into MODULA or Comfort
CLIMA mode (if activated).
23 °C
SET TAMB
PROG - 1
NB:
Stove operation in COMFORT CLIMA (climate) mode may start the start-up and shut-down phase multiple times throughout the
day; this may compromise duration of the resistance used for automatic stove start-up.
! IMPORTANT
Description of symbols and signals of the display
Symbols
ROOM TEMPERATURE
Description of functions
Modifies work power
To modify work power, press the P1-2 key to enter the specific menu and use P5 and P4 keys to adjust desired power from 1 to
5. Increasing power increases pellet consumption and the speed of the exchanger fan. It is not possible to modify power set in the
LAVORO MODULA (Modulate work) phase.
Modulation
During the work phase, the purpose of the stove is to reach the set room temperature; when the set is satisfied, the stove switches
to LAVORO MODULA (Modulate work) mode, the phase where fuel consumption is minimum and the room fan works at minimum
power.
STAR 10.2 C- STAR 12.2 C
Use and maintenance manual
USING THIS MODE IT IS NECESSARY TO MAKE SURE THAT AFTER EACH AUTOMATIC
START-UP THE BRAZIER ALWAYS REMAINS CLEAN IN ORDER TO GUARANTEE A CORRECT
AUTOMATIC
START-UP. THE COMFORT CLIMA MODE ALSO WORKS WITH AN EXTERNAL
THERMOSTAT CONNECTED.
CLOCK
SUNDAY THE STOVE WILL NOT TURN ON
Use the P5 and P4 keys to set the desired power for PROGRAM 1.
Impostare con i tasti P5 e P4 la temperatura ambiente desiderata per il
PROGRAM 1.
10:35
20°C P-1
LAVORO
STOVE STATE
Rev.1 03/08/2017
Page 50
EN
WORK POWER
Publicité
Chapitres
Table des Matières
