Matco Tools MCL2012DDA Instructions De Fonctionnement

ATORNILLADORA TALADRADORA 20V + 1/2"
20V +
OUTIL POUR PERCER/VISSER 20V + 1/2 po
Operating Instructions • Warning Information • Parts Breakdown
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9"
Weight (Tool With Battery) . . . . . . . . . . . . . . . . . . 4 .4 lbs .
Height (Tool With Battery) . . . . . . . . . . . . . . . . . . . . . . 10"
Free Speed Drill Mode Low . . . . . . . . . . . . . . . 0-340 RPM
Free Speed Drill Mode High . . . . . . . . . . . . . . 0-1220 RPM
WARNING
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
MCL2012DDA
1/2" DRILL
DRIVER
S P E C I F I C A T I O N S
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
MCL2012DDA
Maximum Torque . . . . . . . . . . . . . . . . . . . . . .396 inch lbs .
Number of Clutch Settings . . . . . . . . . . . . . . . . . . . . . . . 17
Charge Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 60min
Compatible Battery . . . . . . . . . . . . . . . . . . . . MCL2050LB
Compatible Charger . . . . . . . . . . . . . . . . . . . . . MCLCHRG6
WARNING
Copyright © Professional Tool Products, 2020
1
All rights reserved.
12/2120