L-Acoustics ARCS II SYSTEM Mode D'emploi page 3

LIFTBAR RIGGING BAR LIFTBAR LIFTBAR LIFTBAR
The LIFTBAR is a rigging bar designed to be used with two BUMP3 for flying a horizontal ARCS
Rigging procedures and safety limits
®
Refer to the ARCS
EC EC EC EC DECLARATION OF CONFORMITY
®
L-ACOUSTICS
13 rue Levacher Cintrat
Parc de la Fontaine de Jouvence
91462 Marcoussis Cedex
France
States that the following product:
LIFTBAR rigging bar.
Is in conformity with the provisions of:
2006/42/EC: Machinery Directive.
Applied rules and standards
EN ISO 12100-1: 2004: Safety of machinery;
DIN 18800: Steel Structures.
LIFTBAR LIFTBAR SPECIFICATIONS LIFTBAR LIFTBAR
Description
Rigging element for the ARCS
Dimensions
Weight 3.3 kg /7.3 lbs
Material Steel with anti-corrosion coating
MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE
In order to ensure performance and safety, it is essential to inspect the L-ACOUSTICS
Repairing
®
L-ACOUSTICS replacement kits (KR) are available.
Any other repair work is not authorized and will invalidate the warranty.
For any specific repair or for information about the warranty, contact an L-ACOUSTICS
II SYSTEM rigging manual.
1
:
®
II system
w w w . l - a c o u s t i c s . c o m
Established at Marcoussis, France, July 30
Christophe PIGNON, Research & Development Director
1
®
Please refer to the ARCS II SYSTEM rigging manual for the
authorized configurations
®
®
II array.
th
, 2011
products on a regular basis.
®
representative.