Remote Control; Assembly; Use - Melinera 10534A Instructions De Montage, D'utilisation Et Consignes De Sécurité

3. Place the clips
by turning clockwise.
Note: The candles
been inserted.

Remote control

1. Open the battery cover on the back of the remote control
2. Remove the old batteries from the battery compartment
circumstances require and insert two new 1.5 V batteries, type AAA,
into the remote control
3. Replace the lid of the battery compartment
until it locks into place.

Assembly

Fasten the clips
wish. Using the ball joint in the clip
as you wish.
1
In doing so, be careful that the clip
candle again!
1

Use

Turn the candles
Note: The candles
been inserted.
You have two options here:
– If you just press the ON button
up constantly.
12 GB/IE/NI
back on the candles
4
will light up as soon as the battery has
1
. Ensure the polarity is correct (+ / -).
6
to the branches of your Christmas tree as you
4
on using the ON button
1
will light up as soon as the battery has
1
and screw them tight
1
and slide it shut
5
you can angle the candles
4
is not unscrewed from the
4
.
7
quickly, the candles will light
7
.
6
as the
5