Samson GRAPHITE 49 Manuel D'utilisation page 50

Logiciels de contrôle - « Graphite Editor » - 6.1.4 Affectation des commandes MIDI aux contrôleurs
Go "Setup > MIDI > Input Devices". Make sure MIDIIN5 (Samson Graphite 49) is
-
checked, then click OK. Then go "Setup > Peripherals". Click the MIDI Controllers tab.
For "Type", choose "HUI".
Set "Receive From" to MIDIIN5 (Samson Graphite 49).
-
"Send To" must be set to something, so choose "MIDIOUT2" (Samson Graphite 49).
-
The faders, rotaries, and Transport buttons work as expected. Graphite 49's upper switches
control Solo, and the lower switches control Mute. However, the Bank and Channel buttons
don't work with the HUI protocol.
6.1.4.3.3 « ABLETON LIVE »
In "Options > Preferences", choose "MackieControl" for Control Surface, and set "Input"
-
to "MIDIIN5" (Pour le Samson Graphite 49 qui utilise le port MIDI virtuel 5;
Output doesn't need to be assigned.
-
In the "MIDI Ports" section, turn "Remote" On for the input that says "MackieControl"
-
Input "MIDIIN5" (pour le Samson Graphite 49).
The faders, rotaries, Bank, Track, and Transport buttons work as expected. - upper switches
control "Solo", - lower switches control "Track Activator" buttons.
Samson GRAPHITE 49 - Aide-mémoire Mai 2017
50/57