Operation; Memory Mode - Westinghouse WES41-700S Manuel D'utilisation

8. OPERATION

We recommend adjusting the chair angle before powering up the chair. This way, the body
measurements done automatically by the massage chair will be done correctly.
Back section up and down adjustments
Press this button
Press this button
Then, press on the power On/Off button
length of your back. Once done (about 10 seconds), the automatic massage mode will start. You can
choose another automatic massage mode. There are five automatic massage modes. You can interrupt
the automatic massage mode at any point by shutting off the unit. The massage chair will then
return to its original position.
If you prefer to use the manual massage mode, you can choose the type of massage you want (Shiatsu,
knead, tap, etc.). The massage chair will then use the massage mode you have chosen.
During a massage,
massage functions. The remote control will display a flashing light for 10 seconds. Press on the power
button again and the chair will go back to its original position and deactivate. massage
chair will come back to its original position and shut off.
Automatic massage modes
A. Press on the 'adjust shoulder' buttons
your preference.
B. Press one the Automatic massage mode button of your choice.

Memory mode

M1) During an automatic massage, the first press of the on/off
massage function and the remote control displays "memory", you can choose any button of M1
M2 M3 buttons
press the on/off
return to its original position.
to lower the back and raise the leg and foot section.
to lower the leg and foot section and raise the back.
you can press on the power
,
button again or wait for 10s, the position and massage function will
to start massage.
button at any time. This will pause all
or to adjust the massage chair course length to
, ,
to remember the massage and the position. You can
The WES41-700S will scan the
,
button deactivates the