Westinghouse WES41-700S Manuel D'utilisation page 5

b) Insert the left round holding pin of the foot massager into the left shaft on the massage chair.
c) Do the same for the right side
d) Once inserted well on both sides, insert the locking pins into both shafts.
Back and head cushions
Install the back and head cushions using the cushion's Velcro tape and zipper.
Final Installation
1) Insert the AC power cord into the massage chair power socket and then into the wall power
outlet.
2) Turn on the main power switch at the bottom, behind the massage chair.
3) Congratulations!