Publicité
Instructions Guide
EN
Network Connection
This product only supports wireless network connection for networking access and
does not support wired LAN Connection.
Wireless Network
Check whether the control lamps (LINK/ACT) of your router light up.
Proceed with the operations described in the below 'Getting Started' guide. It is
recommended to run through the setup wizard in the 'System Settings' section.
This unit cannot be connected to a standalone modem directly. A router or a
modem connected to a router has to be used.
Since there are various connection configurations, please follow the specific
instructions of your telecommunication carrier, Internet service provider, and router
setting guidebook.
Getting Started
This instruction manual explains the basic instruction for operating this unit. Unless
otherwise stated, all operations described are based on remote control use.
Powering ON/OFF
Press the q button on the unit or remote control to switch the unit on.
Press the q button on the unit or remote control to switch the unit back to standby.
8
Publicité
