Morningstar RELAY DRIVER Manuel D'installation, D'utilisation Et D'entretien page 17

4. The Threshold Setup screen allows the user to specify the
Threshold Function parameters:
a. Select a Control Variable. In Figure 5, Battery Voltage
b. Choose a high threshold setpoint.
c. The On/Off selection inverses the output when the
d. Specify a low threshold setpoint.
17 | P a g e
Figure 5. Specify Threshold Parameters
has been selected as the Control Variable.
threshold setpoints are met.
M O R N I N G S T A R C O R P O R A T I O N