Maintenance; Nozzle Maintenance; General Maintenance; Accessories - Arctic Cove MAC1410K Manuel D'utilisation

WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.
NOTICE:
Ensure garden hose is disconnected and misting kit is
properly drained when not in use and prior to freezing
temperatures. Water remaining in misting kit during
freezing conditions may freeze and damage misting kit.
To order these accessories, call 1-877-297-8911
 Brass Nozzle ........................................................................................................................................ Model No. MAC080
 Inline Misting Filter ............................................................................................................................. Model No. MACF009
 Nozzle Cleaner .................................................................................................................................. Model No. MACC008
 Drain Valve ........................................................................................................................................... Model No. MAC100
WARNING:
Current attachments and accessories available for use with this product are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.

MAINTENANCE

NOZZLE MAINTENANCE

Irregular mist patterns or leakage may be the result of a
clogged or dirty nozzle.
To clean nozzles:
 Turn the hose faucet completely off and disconnect the
misting tube from the garden hose.
 Remove the brass nozzles from the misting tube.
 Soak nozzles in Arctic Cove nozzle cleaner (not included)
or warm soapy water to loosen foreign materials clogging
or restricting the nozzle.
 Using a garden hose, flush debris out of nozzle by back
flushing (running the water through the nozzle backwards
or from the outside to the inside).
 Reconnect the nozzle to the misting tube.
 Reinstall the misting tube to the garden hose.
WARNING:
Ensure all components of misting system are properly
assembled after maintenance has been performed and
that the system does not leak water. Improper hose
connections and/or leaks can result in a slippery surface
and create a slip and fall hazard.

ACCESSORIES

6 — English