cecotec CERAMICCARE UNIQUE TOUCH Manuel D'instructions page 61

5. TROUBLESHOOTING
Problem Possible causes
The appliance does Check if it is correctly plugged in.
not switch on
You did not press the power button.
The brush has switched off due to
overheating.
Possible solutions
Check that the socket is live and connect the brush.
Press the power button to turn the appliance on.
Unplug the appliance from the mains and allow it to cool down
properly. Before turning it back on, make sure that nothing is clogging
the air inlet.
ENGLISH
CERAMICCARE UNIQUE TOUCH
61