Jet JWL-2035-M Mode D'emploi page 7

The tailstock body can also be used to store tools (Fig 4).
Stand shelf:
You can make an extra shelf that rests between the legs if
you wish (Fig 5-7).
Fig 4
Fig 5
Fig 6
Guard assembly:
Attach guard to the bracket by inserting the rod and lifting up
on the plunger (A, Fig 8).
There are two detents that will hold the guard in place.
One is for turning and the other is for when you need the
guard up and out of the way.
Tighten the bushings (B) against the bracket with two set
screws (C).
Fig 7
Fig 8
Fig 9