Temperature Setting - GREAT LENGTHS GL 3200 ELECTRONIC Mode D'emploi

1. INSTALLATION
• Unpack the machine carefully.
• Pull off the tweezers support (pos. 11). Take off
the tap and rotate the tweezers support toward
thee external side of 90°.
• Insert the plug into a 220 - 230 volts grounding
socket. (For those Countries with 120 volts
power supply, the plug must be inserted in a
120 volts grounding socket).
• The tweezers plug-in is situated on the
right side on the front of the machine (pos.
3). Be careful: the plug holes should match

2. TEMPERATURE SETTING

The device is supplied already preset, in the exact parameters, by the manufacturer.
Pushing 'S' button, the display will show the factory set temperature of the thermal tip.
To set a new temperature value, keep on pushing 'S' button while using '-' or '+' button to reach
the temperature you need.
When releasing the "S" button, the value I sautomatically saved by the machine.
Press "S" to check the fixed temperature value.
the machine ones. Rotate the holding ring to
secure. Now, you can switch on the main socket
(pos. 5).
• "Great Lengths" appears on the screen.
• After 5 seconds, the operative mode is on.
"GL 3200" and "TEMP.C 025.5" should appear
on the screen.
GB