Sony Handycam DCR-TRV12E Mode D'emploi page 161

Masquer les pouces Voir aussi pour Handycam DCR-TRV12E:
Table des Matières

Publicité

Superimposing a still image in
"Memory Stick" on an image
– MEMORY MIX
2
(5) Press –/+ in the lower left corner of the
screen to adjust the effect, then press
OK to return to PAGE2.
M. CHROM
The colour (blue) scheme of the area
in the still image which is to be
swapped with a moving picture
M. LUMI
The colour (bright) scheme of the
area in the still image which is to be
swapped with a moving picture
C. CHROM
The colour (blue) scheme of the area
in the moving picture which is to be
swapped with a still image
M. OVERLAP
No adjustment necessary (You can
select M. OVERLAP only when the
POWER switch is set to CAMERA.)
(6) Press EXIT to return to FN.
(7) Press START/STOP to start recording.
MEM MIX
MEM
OFF
MCCAM
LUMI
MIX
CAMCM
MCCAM
CHROM
CHROM
Still image/Image fixe
Superposition d'une image fixe
d'un « Memory Stick » sur une
image – MEMORY MIX
4
EXIT
MEM MIX
OVER–
OK
OFF
LAP
M. LUMI
101
(5) Appuyez sur – ou + dans le coin
inférieur gauche de l'écran pour régler
l'effet puis sur
PAGE2.
M. CHROM
La couleur (bleu) de la zone de
l'image fixe devant être remplacée
par une image animée
M. LUMI
La couleur (couleurs claires) de la
zone de l'image fixe devant être
remplacée par une image animée
C. CHROM
La couleur (bleu) de la zone de
l'image animée devant être
remplacée par une image fixe
M. OVERLAP
Aucun réglage nécessaire (M.
OVERLAP ne peut être sélectionné
que lorsque le commutateur
POWER est réglé sur CAMERA.)
(6) Appuyez sur EXIT pour revenir à FN.
(7) Appuyez sur la touche START/STOP
pour lancer l'enregistrement.
EXIT
OK
101
OK pour retourner à
161

Publicité

Table des Matières
loading

Table des Matières