DEUTZ-FAHR Agrofarm 85 Manuel D'instructions page 54

CHAPITRE I
All. 3 : Fuel specification (minimum requirements) Fatty Acid Methyl
Ester (FAME) for diesel engines (bio diesel fuel)
Properties
Ester content
Density at 15 °C
Viscosity at 40 °C
Flashpoint
Sulphur content
Coke residue (from 10 % di-
stillation residue)
Centane number
Ash content (sulfate ash)
Water content
Overall soiling
Corrosion effect on copper
(3 h at 50 °C)
Oxidation stability, 110 °C
Acid number
Iod number
Content of linolenic
acid-methylester
Content of fatty
acid-methylester with? 4 do-
uble bonds
Methanol content
Monoglyceride content
Diglyceride content
Triglyceride content
Content of free glycerine
Content of total glycerine
Content of alkaline metals
(Na + K)
Content of alkaline earth
metals (Ca + Mg)
Phosphor content
Limit of filtrability (CFPP) *
-15.04. up to 30.09.
LIV
Units Limit values EN
14214:2003
weight-% at least 96.5
kg/m3 860 - 900
mm2/s 3,5 - 5,0
°C at least 120
mg/kg max. 10.0
weight-% max. 0.30
at least 51
weight-% max. 0.02
mg/kg max. 500
mg/kg max. 24
Degree of 1
cor rosion
Hours at least 6
mg max. 0.5
KOH/g
gr max. 120
lod/100gr
weight-% max. 12.0
weight-% max. 1
weight-% max. 0.20
weight-% max. 0.80
weight-% max. 0.20
weight-% max. 0.20
weight-% max. 0.020
weight-% max. 0.25
mg/kg max. 5.0
mg/kg max. 5.0
mg/kg max. 10.0
°C max. 0
CARBURANT
Test method
EN 14103
EN ISO 3675:1998 EN
ISO 12185:1996/C1:2001
EN ISO
3104:1998/C2:1999
prEN ISO 3679:2002
prEN ISO 20846:2002
prEN ISO 20884:2002
EN ISO 10370:1995
EN ISO 5165:1998
ISO 3987:1994
EN ISO 12937:2000
EN 12662:1998
EN ISO 2160:1998
EN 14112
EN 14104
EN 14111
EN 14103
EN 14110
EN 14105
EN 14105
EN 14105
EN 14105 EN 14106
EN 14105
EN 14108 EN 14109
prEN 14538:2002
EN 14107
EN 116:1997