Publicité
Les langues disponibles
Les langues disponibles
HOW TO OPERATE
BEFORE USING THE STAND MIXER
• Prior to assembling the appliance, ensure all packaging material is removed
and disposed of safely.
• Wash the Mixing Bowl, Beater, Dough Hook, and Whisk attachments thoroughly
in warm soapy water using a soft cloth, then rinse and dry them.
USING THE STAND MIXER
1. Ensure the Speed Control is set to 0
before proceeding.
Note: Failure to set the Speed Control
to 0 may trigger the appliance's
safety feature, preventing activation.
Refer to the
if needed to start the appliance.
2. Press and hold the Tilt Button while
lifting the Mixer Head. Release the tilt
button to lock the head in place.
3. Place the Mixing Bowl into the
grooves on the mixer's base and
turn clockwise to lock it securely.
Ensure the bowl is firmly locked
before proceeding.
4. Attach the Splash Guard directly to
the Upper Body.
5. Select
the
suitable for your recipe.
6. Align the grooves on the attachment
with the attachment shaft, then
press the attachment in while turning
anti-clockwise to lock it into place.
7. Add
ingredients
Bowl,
avoiding
recommended not to exceed 1.2kg
of ingredients at a time, and for
dough kneading, maintain a mix of
roughly 2 parts flour to 1 part water.
SPECIFIC WARNINGS
Mixing
Attachment
to
the
Mixing
overfilling.
It
8. Press and hold the Tilt Button to
unlock the Mixer Head and return it
to the horizontal position. Release
the tilt button to lock it into place.
9. Plug the power cord into the mains
supply. This will illuminate the
Speed Control and flash blue.
10. Turn the Speed Control clockwise
to select a speed and start mixing.
Start at a lower speed to prevent
splattering, then adjust as needed.
Refer to the MIXING GUIDE for
recommended speeds.
11. To use the Pulse function, turn the
Speed Control anti-clockwise from
the off position, holding it in place
for longer pulses.
12. Pause mixing periodically to scrape
down the sides of the Mixing Bowl with
a spatula.
13. When mixing is finished, return the
Speed Control to the 0 position
and unplug the appliance from the
power supply.
is
14. Lift the Mixer Head as described
earlier and remove the Attachment
by pushing it in and rotating it
clockwise.
9
EN
Publicité
