Publicité
Les langues disponibles
Les langues disponibles
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Package contents
1 x panda wall toy (1)
1 x body (1a)
1 x head (1b)
1 x mounting materials (2)
6 x screw (2a)
6 x washer (2b)
6 x wall plug (2c)
1 x instructions for use
Technical data
Dimensions (total): approx. 36 x 55 x 3.5cm
(W x H x D)
Date of manufacture (month/year):
07/2020
Intended use
This product is a toy for children 1 year and up,
for private use.
Safety information
• Children may only play with the product
under adult supervision.
• Check whether the wall is suitable for mount-
ing the product on. Unsuitable wall surfaces
can lead to injuries.
• The wall mounting must be done by an adult.
• Ensure the product is mounted appropriately
and according to these instructions for use.
Improper installation can lead to injuries and
impair the safety and function of the product.
4
GB/IE/NI
• Warning. Neither the packaging/mounting
materials nor the 'SUPER DRY' pouch (desic-
cant) are a constituent part of the toy and they
must be removed before the product is given
to children to play with.
• Warning. Desiccant contains calcium chloride
(CAS 10043-52-4). Keep out of reach of
children.
• Check the product for damage or wear
before each use. Only use the product if it is in
perfect condition!
Assembly (Fig. A)
For wall mounting, you need the following tools,
not included in the package contents: a drill and
a hammer.
1. Mark the drill holes for the body (1a) on the
wall using a pencil.
2. Drill a hole with the drill at each mark.
3. Insert a wall plug (2c) into each hole.
Note: if the wall plugs can't be pressed into the
hole with your thumb, use a hammer.
4. Screw the body in place using the screws (2a)
and washers (2b).
5. Proceed with the head (1b) as for the body.
Note: when marking the position, make sure the
supports on the back of the head is sitting on the
upper edge of the body.
Using the product (Fig. B)
Sort the elements (1c) and put them onto the
appropriate shape.
Storage, cleaning
When not in use, always store the product
clean and dry at room temperature. Only clean
the product with a damp cloth and wipe dry
afterwards.
IMPORTANT! Never clean the product with
harsh cleaning agents.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Publicité
