Table Des Matières; Safety Information; Waterco Fibreglass Filters - Waterco Exotuf E400 Manuel D'installation Et D'utilisation

SAFETY INFORMATION ---------------------------------------------- 01
WATERCO FIBREGLASS FILTERS ---------------------------------- 01
INSTALLATION -------------------------------------------------------- 02
MULTIPORT (4 & 6 Way) VALVE OPERATION ---------------------- 05
INITIAL STARTUP OF FILTER ---------------------------------------- 06
BACKWASHING ------------------------------------------------------ 06
MAINTENANCE ------------------------------------------------------- 08
WINTERISING -------------------------------------------------------- 08
TROUBLESHOOTING ------------------------------------------------ 09
WARRANTY ----------------------------------------------------------- 09

SAFETY INFORMATION

1. Waterco fibreglass filters are designed to work with water at a temperature > than 0ºC and < than
50ºC. The filter should never be operated outside of these temperatures or damage may occur.
2. The installation should be carried out in accordance to local safety standards and bylaws.
3. Any modification of the filter requires the prior consent from Waterco. Original replacement parts
and accessories authorised by the manufacturer ensure a high level of safety. Waterco assumes no
liability for the damage and injuries caused by unauthorised replacement parts and accessories.
4. The user should make sure that the installation is carried out by qualified authorised persons and that
these persons have first carefully read the following instructions.
5. The operating safety of the filter is only guaranteed if the installation and operation instructions are
correctly followed.
6. In the event of defective operation or fault, contact Waterco or its nearest authorised service agent.
7. To reduce the risk of injury, do not permit children to use this product.
8. Incorrectly installed equipment may fail, causing severe injury or property damage.
9. Chemical spills and fumes can weaken Swimming Pool / Spa equipment. Corrosion can cause
filters and other equipment to fail, resulting in severe injury or property damage. Do not store pool
chemicals near your equipment.

WATERCO FIBREGLASS FILTERS

Waterco fibreglass filters embody the latest in fibreglass winding technology. Waterco fibreglass vessels
consist of an inner shell of fiberglass reinforced polyester resin wound over with fibreglass filament.
Waterco's digitally controlled filament winding machine faultlessly winds continuous strands of high
quality fibreglass filament under controlled tension filament to create a seamless one-piece vessel with
refined consistency and superior quality.
There are no welds or seams or special tank linings which can corrode or electrolyse.
Inflow diffuser for even distribution
of water flow across the filter bed.
Pressure gauge.
Six position Multiport valve with sight
glass and quick connect half unions.
Fibreglass wound tank, UV and
Corrosion Resistant.
Hydraulically balanced laterals to
maximise water flow and filtration.
Manual Drain*
Large filter base for stable floor
mounting.
Waterco Sidemount fibreglass filters
Waterco Fibreglass Filters I pg 01
Waterco Top Mount fibreglass filters
* Optional manual drain