emerio MO-125236 Mode D'emploi page 6

MO-125236
PARTS DESCRIPTION
1. Big hotplate
2. Small hotplate
3. Temperature knob
4. Big hotplate indicator light
5. Big hotplate knob
6. Small hotplate indicator light
7. Small hotplate knob
8. Oven indicator light
9. Function knob
10. Door handle
11. Glass door
12. Tray handle
13. Baking tray
14. Wire rack
15. Inner lamp
BEFORE USE

Remove all packaging materials from the appliance. Clean the appliance according to the section "HOW TO
CLEAN" below.

Make sure the appliance is unplugged.

Before initial use, it is recommended that you run the oven with the function "
minutes to eliminate the remaining packing residue and odor.
NOTE: Initial start-up operation may result in slight smell and smoke. It is due to the burning of protective
substance applied to the heating elements. This is normal and harmless.
OPERATION
1. Place the appliance on a flat and heat resistant surface. Make sure that there is enough ventilation around
the appliance.
2. Insert the power plug into the socket.
3. Slide the wire rack with food into the slot of the appliance. And then slide the baking tray under the wire
rack to collect the dripping oils. You can also directly put food on the baking tray itself. Choose your desired
- 5 -
EN
15
" for approximately 15