USER MANUAL
CAUTION!
When draining the wastewater, the vacuum
tube for waste must be folded (A, Figure 12)
and lowered to a lower position (B, Figure
12), and then open the lid of the vacuum tube
for waste to drain the water. Do not make
the outlet of the vacuum tube for waste face
upward to drain the water vertically. This is
to avoid wastewater spilling onto the opera-
tor.
6.
Perform steps 1 to 4.
Solution/clean water tank emptying
7.
Empty the solution tank with the outlet cover (A,
Figure13). After working, rinse the tank with clean water.
AFTER USING THE MACHINE
After working, before leaving the machine:
1.
Remove the brushes/pad-holders.
2.
Empty the tanks (B and C, Figure13) as shown in the
previous paragraph.
3.
Perform the daily maintenance procedures (see the
Maintenance chapter).
4.
Store the machine in a clean and dry place, with the
brushes/ pad-holders and the squeegee lifted or removed.
MACHINE LONG INACTIVITY
If the machine is not going to be used for more than 30 days,
proceed as follows:
1.
Perform the procedures shown in After Using the
machine paragraph.
2.
Disconnect the battery connector (54).
FIRST PERIOD OF USE
After the first 8 hours, check the machine fastening and
connecting parts for proper tightening and check the visible
parts for wear and leakage.
17
ENGLISH
Figure 12
C
D
A
Figure 13
A
B
B