Replacing A Fine Cartridge - Canon PIXMA MX300 Guide De Démarrage Rapide

Replacing a FINE Cartridge

When FINE Cartridges run out of ink, replace them using the following steps.
1
Make sure that the machine is turned on, lift
the Scanning Unit (Printer Cover) with both
hands, then pull the Scanning Unit Support
(A) down into place.
2
Push down the FINE Cartridge.
3
Remove the FINE Cartridge.
4
Unpack a new FINE Cartridge and remove
the orange protective tape (A) gently.
Important
Handle FINE Cartridges carefully to avoid staining
your clothes or surrounding work area.
Do not touch the electrical contacts or Print Head
Nozzles on a FINE Cartridge. The machine may not
print out properly if you touch it.
(A)
Replacing a FINE Cartridge
(A)
35