Publicité
Les langues disponibles
Les langues disponibles
Using your Car Power Adapter
Connect the Car Adapter Power Plug to the slave LCD screen's power jack and plug the
other end to the vehicle's cigarette socket as the figure shows below.
Aitention
Do not operate the unit or view video software while driving a vehicle.
Place the unit in a proper position for viewing.
Disconnect the player from the Car Adapter when starting the vehicle.
SYMPTOM
HOW TO CHECK
- Make sure system connection is correct.
- Make sure the speakers are turned on.
- Make sure the audio source is correct.
There is no sound.
- Make sure LCD screen is on and in correct video mode.
There is no picture.
- Make sure your system connection is correct.
- Make sure the video source is correct.
Others possibilities:
Static or other external interference may cause the unit display abnormally. In order to recover
normal status, unplug the power-supply cord and then plug it in to reset the unit. If the
problems still exist, disconnect the power and consult your service center or a qualified
technician.
Publicité
