Use Netgear Genie After Installation; Upgrade Router Firmware - NETGEAR MBR1516 Guide De L'utilisateur

Use NETGEAR genie after Installation

When you first set up your router, NETGEAR genie automatically starts when you launch an
Internet browser on a computer that is connected to the router. You can use NETGEAR genie
again if you want to view or change settings for the router.
1. Launch your browser from a computer or wireless device that is connected to the router.
2. Type http://192.168.0.1.
The login screen displays:
3. Enter admin for the router user name and password for the router password, both in
lowercase letters.
Note: The router user name and password are different from the user name
and password for logging in to your Internet connection. See
and Access

Upgrade Router Firmware

When you set up your router and are connected to the Internet, the router automatically
checks for you to see if newer firmware is available. If it is, a message is displayed on the top
of the screen. See
firmware.
Click the message when it appears, and click Yes to upgrade the router with the latest
firmware. After the upgrade, the router restarts.
CAUTION:
Do not try to go online, turn off the router, shut down the computer, or do
anything else to the router until the router finishes restarting and the Power
LED has stopped blinking for several seconds.
Mobile LTE Broadband 11n Wireless Router MBR1516
admin
********
on page 16 for more information.
Router Upgrade on page 64 for more information about upgrading
Getting Started with NETGEAR genie
18
Types of Logins