Tape Counter And Memory Stop - Denon DRM-555 Mode D'emploi

TAPE COUNTER AND MEMORY STOP

1) Operation of the Tape Counter
(1) Press the Counter Reset button (RESET) to reset the counter to
"‚‚‚‚".
(2) By using the Play, Fast Forward or Fast Rewind functions, the reading
of the counter will change to indicate index position.
• During recording and playback operations, the counter is useful for
noting the location of existing programs or positions where recording is
to be started.
• The reading of this counter does not correspond with that of any other
deck.
2) MEMORY STOP Operation
(1) During recording or playback, the Memory Stop feature can be used to
locate a particular point on the tape. Press the Counter Reset button
(RESET) at the desired point.
(2) Then press the Counter Memory button (MEMORY), the MEMO
indicator lights.
dB 40 30 20 10 5 3 1 0
L
R
MPX SYNC
REMOTE SENSOR
2 3
PLAY STOP REC PAUSE
DIRECTION REC/REC MUTE
CD SYNCHRO REC
Caution:
If the memory stop operation is performed after repeated fast-forwarding or
rewinding, the tape may not stop at the proper position.
RESET
+1 +3 +5 +10
COUNTER
MEMORY
MEMO
DOLBY NR REV MODE
B OFF C
(3) When the Fast Rewind button (
travel ( ), or the Fast Forward button (
reverse tape travel ( ), the tape is rapidly rewound (or advanced)
until the counter indication of "‚‚‚‚" is reached.
• The Memory Stop feature will rewind or forward the tape to within –5
counts in the forward ( ) direction (from "‚‚‚‚" to "
to within +5 counts in the reverse (
"‚ ‚ ‚ fi "). After this, several seconds are required for corrective
operations.
ENGLISH
MPX
00
) is pressed during forward tape
11
) is pressed during
") and
) direction (from "‚‚‚‚" to
13