EasyWalker SKY Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Assembling the EasyWalker SKY
Contents of the box
The following items must be contained in the EasyWalker SKY box: 
1 frame with a wristband, the seat comprising a left and right part and the 
storage basket.
1 sun canopy. 
2 rear wheels and 1 front wheel with inflatable tires.
1 bumper bar
1 rain cover for over the seat with the sun canopy. 
1 connection tube for use with the carrycot.
1 instruction leaflet.
If items are missing, immediately contact the shop where you purchased the pushchair. 
!
WARNING: Keep plastic covers away from babies and children to avoid suffocation. 
Be aware of environmental considerations. When disposing of packaging, carefully 
separate rubbish for recycling. 
Frame
IMPORTANT: The EasyWalker SKY should only be used with the accompanying seat 
and accessories. Only use the EasyWalker carrycot or accessories approved for use by 
EasyWalker on the EasyWalker SKY.
IMPORTANT: When assembling the EasyWalker SKY a child should not be in the seat or 
cot. 
TIP: If the instructions say left or right, this is always meant when looking from behind 
the EasyWalker SKY push­bar.
TIP: All components are designed to fit together so you do not need to use force. If 
something is not working, read the instructions again and try once more. If it still does 
not work then ask for help in the shop where you purchased the pushchair or go to www.
easywalker.nl  
TIP: Use the cardboard packaging as a mat whilst assembling the item. 
The EasyWalker SKY is easy to assemble. The EasyWalker SKY is supplied with the seat 
and the storage basket already fitted.
Opening out
!
WARNING: Ensure that all the locking devices are engaged before use.
Take the frame out of the box and place it on the ground in front of you. You can use the 
cardboard packaging as a mat whilst assembling the item. If it is still secured, loosen 
the locking hook  and pick up the EasyWalker SKY using the push­bar (image 1).  The 
EasyWalker SKY will unfold by itself (image 2). If you hear a double click, then the 
EasyWalker SKY has unfolded correctly. Check whether the red safety catch on the right­
hand side of the EasyWalker SKY is in the locked position (image 3). 
Wheels 
Flip the parking brake upwards (image 4). Insert the rear wheel into the rear axle of 
the frame while you press the button in the middle of the rear wheel (image 5). 
EN­16

Publicité

Table des Matières
loading

Produits Connexes pour EasyWalker SKY

Table des Matières