Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
TROUBLESHOOTING
Check the chart below for a possible cause of the problem you are experiencing before requesting
service for this unit, Some simple checks or minor adjustment on your part may eliminate the problem
and restore proper operation. Let the technician maintain the unit. Keep away from static electricity
properly before maintenance as loader, key IC are easy to be damaged by it.
Trouble
No power
Plug the power cord into the power outlet tight to turn on/off once
Disc access time within 10-20 seconds is normal
The disc is scratched or defiled (change disc)
Cannot read disc
The code of disc is different from the code of unit (change the disc)
PAL to NTSC error (Set video output as AUTO)
If your TV does not have P-Scan function, pressing VIDEO button on the
No picture
remote may cause this. Press VIDEO button again to rectify.
Ensure that the equipment is connected properly.
Ensure that the TV or audio equipments are not muted.
No sound
Ensure that the audio output setting is correct.
Picture is distorted
The picture will be somewhat distorted at times.
during fast forward or
This is normal advance or reverse.
reverse
No (4:3)(16:9) picture
Choose the correct setup at TV TYPE item that matches the TV set.
Check the batteries being installed with correct polarities.
Remote control does
Replace the batteries depleted. Point at remote control sensor and
not function
operate it within 5 meters.
,
Unit s or remote
control buttons are
Turn the unit off and then back to on. Alternatively, turn off the unit,
not functioning or
disconnect the AC power cord for 5 to 10 minutes and then reconnect it.
other abnormal
phenomena
If the audio soundtrack and/or subtitle language does not exist in the
Audio soundtrack and/
disc, the language selected at the initial settings will not be seen/heard.
or subtitle language
Alternative audio soundtrack (or An alternative language is not selected
not found in settings
with discs which contain subtitle) language cannot be more than one
language selected.
This function depends on software availability.
Can not change angle
Even if a disc has a number of angles recorded,
these angles may be recorded for specific scenes only.
No playback menu
This function is suitable for VCD with playback control disc.
In program playing mode, no repeat, A-B functions are available.
Miscellaneous
Suggested solution
18
Publicité
