Operation Instruction - Teddington IKARIA Inverter Manuel D'utilisation Et Installation

VI. Operation instruction
Picture for keys
Note:
You may set the desired water temperature from 18 to 35℃.
①
The on the right shows the inlet water temperature. The
②
the left shows the set temperature by pressing
After you turn on the heat pump, the fan will start to run in 3 minutes. In
③
another 30 seconds, the compressor will start to run.
During heating, the
④
2.2.1. Mode selections
will be light as standard when you turn on the heat pump.
①
Press the
②
light.
Press the
2.2.2. Compulsory defrosting
When the heat pump is heating and the compressor is working
①
continuously for 10 minutes, press both "
seconds to start compulsory defrosting. (Note: the interval between
will be light.
button to enter the Silence mode, the
button again to exit and enter the SMART mode.
" and "
11
or button.
will be
" buttons for 5
on