Télécharger Imprimer la page
Johnson Controls M91 GDA-1N1 Serie Manuel D'installation
Johnson Controls M91 GDA-1N1 Serie Manuel D'installation

Johnson Controls M91 GDA-1N1 Serie Manuel D'installation

Commandes pour actionner les clapets à air de systèmes cvc

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6

Liens rapides

M91xx-GDA-1N1 / M91xx-GDC-1N1
Non Spring Return Proportional Electric Actuators
Installation Guide
100
82.5
20
180
Dimensions • Dimensions • Abmessungen • Dimensioni • Dimensiones • Afmetingen
• Mått • Rozměry • Wymiary • Размеры • 尺寸 • 外形寸法
MAX 95% RH
Ø 4
45
10-20 10-16
137
11
25.5
67.5
2
94.5
35
8
8.5
Ø4
3.5
[mm]
MAX
+50 °C
MIN
-20 °C
1
190
180
168
150
143
118
68
9.5
3.5
P/N 14-88360-2048_Rev. D_11 2022
25.5
17
5

Publicité

loading

Sommaire des Matières pour Johnson Controls M91 GDA-1N1 Serie

  • Page 2 M91xx-GDA-1N1 / M91xx-GDC-1N1 Angle of rotation limiting Releasing the adapter 0...20 mA Adapter for: Round spindles: Ø 10...20 mm Square spindles:  10...16 mm Signal Data 4...20 mA Auxiliary switch Direction of rotation Manual button Commutateur Werkseitige Interruttore Interruptor Pomocný Przełącznik a./b.
  • Page 3 M91xx-GDA-1N1 / M91xx-GDC-1N1 50 min 50 min 50 min 4 ÷ 6 Mounting Instructions • Instructions de montage • Montageanweisungen • Istruzioni per il montaggio • Instrucciones de montaje • Montage-instructies • Monteringsinstruktioner • Montážní pokyny • Instrukcja montażu Degree of protection: IP 54 (with cable glands, cable downwards) Pollution degree 2 Degré...
  • Page 4 M91xx-GDA-1N1 / M91xx-GDC-1N1 • Proportional Control • Commande proportionnelle • Stetige Ansteuerung • Controllo proporzionale • Control proporcional 230 VAC ±10% • Proportionele regeling 0(4)...20 VDC • Proportionell kontroll 0(2)...10 VDC • Proporcionální řízení • Sterowanie proporcjonalne • Parallel Connection •...
  • Page 6 M91xx-GDA-1N1 / M91xx-GDC-1N1 Manuel d’installation pour le specialiste / monteu LISEZ ATTENTIVEMENT LES PRÉSENTES INSTRUCTIONS ET LES CONSIGNES DE SÉCURITÉ AVANT DE PROCÉDER À L’INSTALLATION ET CONSERVEZ-LES AUX FINS D’UTILISATION ULTÉRIEURE CARACTÉRISTIQUES GÉNÉRALES CÂBLAGE Les commandes sont conçues pour actionner les clapets à Branchements électriques via un transformateur air de systèmes CVC.
  • Page 14 • Överensstämmelse • Shoda s požadavky norem a směrnic • Dane dotyczące zgodności • Соответствие стандартам • Conformidade Johnson Controls declares that these products are in compliance with the essential requirements and other relevant provisions of the EMC Directive and Low Voltage Directive, and equivalent UK regulations.
  • Page 15 M91xx-GDA-1N1 / M91xx-GDC-1N1 P/N 14-88360-2048_Rev. D_11 2022...

Ce manuel est également adapté pour:

M91 gdc-1n1 serie