Set The Ringer Melody; Set The Ring Volume; Set Flash Time; Set Pause Time - TIPTEL 272 Manuel D'utilisation

Set the Ringer Melody

After set up the PABX PREFIX, press X/MENU to access the RINGER MELODY
setup. Press

Set the Ring Volume

After set up the RINGER MELODY, press X/MENU to access the RINGER VOL.
setup. Press
confirm.

Set Flash Time

After set up the RINGER VOL., press X/MENU to enter the FLASH TIME setup.
Press
and press X/MENU to confirm. Please, ask your network provider or PBX installer
e
(in case this device is used behind a PBX) for the appropriate setting.
n
g

Set Pause Time

After set up the FLASH TIME, press X/MENU to enter the PAUSE TIME setup.
Press
confirm.
Dialling out the device will create a pause of the selected length after dialling the
digits stored in PABX PREFIX (see above). This pause time will be used when
pressing
Set DTMF or Pulse Dialling
After set up the PAUSE TIME, press X/MENU to access the DTMF or PULSE
DIALLING setup. Press
X/MENU to confirm.
Please, ask your network provider or PBX installer (in case this device is used
behind a PBX) for the appropriate setting.
It is possible to temporarily switch from pulse to DTMF (tone dialling) mode during a
call pressing * .
to select the melody (1-16) and press X/MENU to confirm.
to select the ring volume (1-8) and press X/MENU to
to select the flash time(100ms, 200ms, 300ms, 400ms, 600ms, 900ms)
to select the pause time(1.2s, 2.4s, 3.6s) and press X/MENU to
or using the telephone book accordingly.
to select the mode(DTMF or PULSE) and press
Setup
12