Publicité
Les langues disponibles
Les langues disponibles
1. CONNECT YOUR MOUSE (USB)
Remove the foil and turn the mouse on. Slide open the hatch on the
bottom. Take the USB receiver out of the mouse and stick it into the USB-A
port of your laptop or desktop. Close the hatch again. The connection
should establish within a couple seconds.
ON
OFF
2. CONNECT YOUR MOUSE (BLUETOOTH)
Press the connection button and set it to the desired Bluetooth channel.
Next, press and hold the button until the light starts flashing. Open the
Bluetooth settings on your laptop or desktop and select the mouse. The
connection should establish within a couple of seconds. Use your mouse
on multiple devices? Repeat this step. You can easily switch between the
channels with this connection button.
4
3. CHARGE YOUR MOUSE
If the light on top of your mouse is flashing, the battery is empty. Charge
the mouse with the included USB-A to USB-C cable. You can connect
this to the USB-C port of your device. Don't use fast chargers. The mouse
doesn't support this and it shortens the lifespan.
4. ADJUST THE DPI
Adjust the speed of your mouse by adjusting the DPI. Briefly press the
button on top of the mouse. You can choose from 4 speeds: 1000DPI (slow),
1600DPI (medium), 2400DPI (fast), and 3200DPI (very fast).
5
Publicité
