Parkside Performance PRDSP 20-Li C2 Instructions D'utilisation Et Consignes De Sécurité page 45

Recommended ambient temperature
(product and battery pack)
While charging:
During operation:
During storage:
Noise emission value
The measured values have been determined in
accordance with EN 62841 . The A-rated noise
level of the power tool is typically as follows:
Sound pressure level L
Uncertainty K :
pA
Sound power level L
Uncertainty K :
WA
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Hand/arm vibration a
Uncertainty K :
WA
m
WARNING!
Wear ear protection!
NOTE
u
The declared vibration total value and
the declared noise emission value have
been measured in accordance with a
standard test method and may be used
for comparing one tool with another .
u
The declared total vibration value and
the declared noise emission value
may also be used for a preliminary
assessment of exposure .
+4 °C to +40 °C
+4 °C to +40 °C
+20 °C to +26 °C
: 67 .3 dB(A)
pA
3 dB
: 75 .3 dB(A)
WA
3 dB
: <2 .5 m/s 2
h,D
1 .5 m/s 2
m
WARNING!
u
The vibration and noise emissions during
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed . Try to minimise exposure
to vibration and noise . Examples of
measures to reduce vibration include
wearing gloves when using the tool
and limiting working time . All parts of
the operating cycle must be taken into
account (e .g . times when the power tool
is switched off and when it is running idle
in addition to the trigger time) .
Safety instructions
˜ General power tool safety
warnings
m
WARNING!
u
Read all safety warnings,
instructions, illustrations and
specifications provided with
this power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury .
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool .
Work area safety
1 . Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
2 . Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes .
GB/IE 43