Set Up Instructions - Blue Fuel 85-915 Guide D'utilisation

3w cob led lampe d'inspection rechargeable
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.3 DO NOT expose to temperatures above 140°F (60°C).
2.4 Replace the battery pack ONLY with one designed for this product.
2.5 Recycle or dispose of the used battery as required by local regulations.
2.6 If the electrolyte in the cells gets on your skin, wash thoroughly with soap
and water. If it gets into your eyes, rinse thoroughly with cool water and seek
immediate medical attention.
2.7 This product contains a lithium ion battery. In case of fire, you may use water, a
foam extinguisher, Halon, CO
or soda (sodium carbonate) to extinguish the fire. Once the fire is extinguished, douse
the product with water, an aqueous-based extinguishing agent, or other nonalcoholic
liquids to cool the product and prevent the battery from re-igniting. NEVER attempt to
pick up or move a hot, smoking, or burning product, as you may be injured.
3.

SET UP INSTRUCTIONS

3.1 Remove any cord wraps and uncoil the cable between the charger and the work light.
4.
FEATURES
1 2 3
5
ON/OFF power button
1.
2. Charging socket
3. Charging status LED indicator
4. 3W COB LED
5. Magnets
, ABC dry chemical, powdered graphite, copper powder
2
4
6. Hook
7. SMD LED
8. USB/Micro USB charging cable
9. 100V~240V AC wall charger
with USB port
• 4 •
6
7
9
8

Publicité

Table des Matières
loading

Table des Matières