Operating The Dguard; Using The Dguard ® System; Switching On The Dguard - digades DGUARD Mode D'emploi

OPERATING THE dguard

4 Operating the dguard
4.1 Using the dguard
Observe the following requirements:
• You have laid the cable harness and connected it to the vehicle.
(Chapter „3.1 Laying the cable harness", p. 11)
• You have installed the dguard
(Chapter „3.2 Installing the dguard
EN
• You have installed the GPS antenna.
(Chapter „3.3 Installing the GPS antenna", p. 16)
• You have installed the dguard
(Chapter „3.4 Installing the dguard
• You have installed the dguard
(Chapter „3.5 Installing the dguard
1. Open the dguard
Ö The first time you log on to the app, the vehicle overview is opened.
2. Click on „Create motorcycle".
3. Follow the instructions in the app.

4.2 Switching on the dguard

Observe the following requirement:
• You have installed the dguard
GPS antenna and connected them to the cable harness
• You have unlocked the system.
1. Switch on your motorbike's ignition.
Ö The LED on the dguard
on. As soon as the LED on the dguard
the system is active.
22
SYSTEM
®
®
system
®
button.
®
button", p. 13)
®
module.
®
module", p. 17)
®
app and created a user account.
®
app", p. 19)
®
app and log in with your user account.
®
system
®
module, the dguard
®
button flashes and the system is switched
®
system
button and the
®
button lights up permanently,
®