TiCad STAR Manuel D'utilisation page 52

Tightness of the frame elements is only guaranteed when the drawbar ball is firmly tightened.
 Always retighten the drawbar adjustment after repositioning the drawbar
(even when folded).
Set adapter for umbrella holder
Adjust the adapter of the sunshade holder according to your wishes and height.
 Loosen the screw in the middle of the adapter using the Allen key supplied. Turn the
adapter into position.
Larger hole must point upwards, smaller hole (with thread) downwards.
 Tighten the screw again.
7
1
2
Adjusting the drawbar
 Turn the drawbar ball (2) three to four
turns counterclockwise until the
drawbar (1) can be moved without
resistance.
 Position at the desired height.
 Adjust the drawbar so that the golf
trolley is balanced with the golf bag
attached when pulling.
 Tighten the drawbar ball clockwise.
Move the drawbar slightly up and
down so that the teeth of the lock
engage optimally and are not
damaged.