Terraillon EASY CARE Manuel D'utilisation page 46

EN
STAGE 5
Select the treatment program.
EASY CARE provides you with a choice of: 3 treatment modes: TENS/EMS/MASS
Press the button several times to cycle through to the desired treatment mode.
Press the (-) button to confirm the mode.
The selected mode flashes.
STAGE 6
Start the session and adjust the intensity.
Press the (+) button to start the treatment.
Once the mode has been selected, press the (+) or (-) button to adjust the intensity.
The maximum intensity level goes up to 15.
When the program has finished, the device is automatically switched off.
CAUTION:
• If the electrodes are not placed firmly on skin, or the device has not connected with the electrodes, and the output intensity
level is over 1, the intensity will stop automatically.
46