Maintenance And Care - Bormann Pro Bcp3160 Mode D'emploi

EN
Power On / Power Off
• To switch on, slide the switch button (5) forward.
• During prolonged use, the key can be locked in the ON position by pressing the front of the key until it clicks.
• To disengage, press the back of the key to release it from the latch and slide the key toward you. The tool will turn off.
Speed selection
• Speed is selected by setting the governor wheel (6) to one of 6 positions Speed range from 2000 rpm (position "1") to 4500 rpm (position "6").
ATTENTION
After turning off the machine, the polishing tool continues to rotate for some time.
NOTE
After changing the tool (for example, when a woolen pad is used instead of a polishing pad), the difference in weight may cause increased vibration. In this case,
change the operating speed of rotation with the regulator until the vibration drops to an acceptable level.
• Before bringing the product to the polished surface, turn it on and let it pick up the set speed.
• To achieve good polishing results and long tool life, move the product in a circular motion over the polished surface with light pressure and in such a way
that the resulting circles overlap.
• When processing "sensitive" surfaces (eg car paintwork) do not use much force, work at low speeds and lightly press the product.
• When using polishing paste, it is necessary to use a separate polishing attachment supplied for each type of paste.

MAINTENANCE AND CARE

WARNING
Before starting any maintenance work on the polisher, be sure to unplug the plug from the socket.
Cleaning
• Regularly clean the machine and its ventilation openings. How often this should be done depends on the material being processed and how long the product
has been used.
• The engine of the product and its housing should be blown from the inside with dry compressed air.
Carbon Brushes
NOTE
Defective parts should be replaced only with spare parts manufactured by the manufacturer.
If the brushes spark strongly during operation, the polishing machine must be switched off immediately. After that, it should be sent for repair to an authorized
workshop.
Gearbox
Do not self-disassembly the gearbox.
ENVIRONMENTAL DISPOSAL
WARNING
Before starting any maintenance work on the polisher, be sure to unplug the plug from the socket.
In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of
recyclable materials and can be disposed accordingly. The tool's plastics components are marked according to their material, which makes it possible to remove
environmental friendly and differentiated because of available collection facilities.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
6
WWW.NIKOLAOUTOOLS.COM