Xtyle Odeon Wave Beach 3D Guide D'utilisation page 6

7- 3.5MM JACK PLUG
Your X.O. Wave Beach 3D Stereo headset can also be
used using the jack cable included in the box. Other
cables might create technical issues. You may lose your
vendor's warranty by not using an X.O. original jack 3.5
mm cable.
Please take the time to look at your Jack cable. You will
notice that there is no microphone built in on your cable.
The jack cable is intended only for listening to music.
You have no microphone to take or receive calls with the
cable. All the built-in wireless controls on your headset
will be unable to control the device you connect via the
Jack plug. When connected with the jack, use the control
of the device to change track, volume, or pause.
8- Built-in microphone
The built-in microphone, like all the built-in control
buttons, are active only when your X.O. Wave Beach 3D
is charged and powered on, and that you are paired via
the Bluetooth of a smartphone or tablet.
You can be paired to up to 2 devices simultaneously
wirelessly.
9- Low battery
When the battery power is low, the headphones will
automatically turn off. To maintain proper battery levels,
charge the headphones at least once per month. If
the headphone sits without being powered on for long
periods of time, it will need to be recharged to maintain
full battery levels.
10
How do I connect wirelessly?
Before you start:
- Make sure your X.O. Wave Beach 3D headset is turned
OFF at this stage.
- Make sure the smartphone or tablet you try to connect to
is Bluetooth-enabled, with Bluetooth turned ON.
- If your smartphone or tablet is currently connected to
an audio Bluetooth peripheral, please disconnect it. Go
into your device's settings, and in the Bluetooth menu,
disconnect any Bluetooth audio device.
1. Turn your X.O. Wave Beach 3D headphone ON by
holding down the ON/OFF button (5). The LED indicator
(8) will start flashing alternatively and rapidly in red and
blue colors. Your headset is now discoverable by a
smartphone, tablet or any other Bluetooth device.
2. Go into the settings of your device, in the Bluetooth
menu, and select "X.O. Beach 3D". You are connected
now to your device. The LED indicator is now turned off.
In the unlikely case your device requires a password to
connect to the X.O. Wave Beach 3D, enter "0000".
3D Surround Effect companion
Application
Your X.O. Wave Beach 3D comes with its companion app,
Boom. Boom is a state-of-the-art DSP application (Digital
Signal Processing) that runs on your iOS or Android
device. Boom is a new and different music player, that taps
11